![]() ![]() (I had this problem with my Arturia Minibrute 2S and Arturia said the issue was caused by a Low Pass filter in the circuit). I have a problem on a few devices that don't like the pulses as the rising edge is too slow. ![]() The other issue that comes up again and again is the steepness of a pulse. I use a separate mult cable for patches that need the reset. On my rack I have a mult dedicated to the clock and run signals. I'd recommend a patch that use the 'Reset' pulse to sync the devices all together. So the clocks are never in perfect sync they are sync'd up at intervals. (Create a 2nd trig_detect_inv patch and work that into the CV Tools device).Īlso note that the CV Tools tempo sync does beat detection and sets the Live Tempo as the detection changes. If you like to code in Max and gen you can copy and modify the gen 'trig_detect' patch by inverting the logical >0 and <0 checks. The CV Tools has a toggle mode but this only works on a +ve pulse. The Run signal will not work with CV Tools as it sends a +ve pulse to start and a -ve pulse when the sequencer is stopped. I set the out clock at 16, this is needed as the Steppy does not support 24ppq. I think ll need to end up getting a multiclock eventually when i can spare some cash.įYI I use the Vector as my master clock for Max, Ableton Live, IJ Steppy and Pam's NW. Thanks a lot yes i know about the bad usb stories that why i was looking foward clock it with audio. ThomasWOW MAN ur epic !! that would be nice if u can send so i can see. Yesterday I really had to make this clear to myself again. If you are interested, I can also send you the Ableton project itself.Ī little warning and a reminder to myself: You shouldn't let these timing problems stop you from making music. I will post these in a separate post today after work. Last night I tried to investigate the problem in more detail and created a corresponding Ableton project and some screenshots. The systems differ in functionality, price and availability, but the basic approach is comparable. Expert Sleepers USAMO, E-RM Multiclock (which I use), SND ACME-4 and Innerclock work on this principle. This hardware then generates MIDI Clock, DIN Sync or Gate/x PPQN signals. They use a plug-in inside the DAW and an audio output to send start/stop/reset commands and tempo to external hardware. ![]() Some solutions take advantage of this fact to get a stable clock from the DAW. There are a few general tips that reduce the problem, but those do not eliminate it:Īudio processes have a much higher priority compared to MIDI processes. MIDI is given low priority within processor cycles. I can only talk about Windows here, but I have heard about similar problems with MacOS. This is not a problem of Vector or Ableton or any other DAW, but is due to the implementation of MIDI in the operating system. The connection between Ableton and Vector via USB-MIDI (via MIDI in general) is very susceptible to (constant) delay and jitter (variable delay). This is certainly not a problem that only occurs with your device. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |